(follow content copied from item instructions)
INSTRUCTIONS FOR USE
MASK,EXTREME COLD WEATHER
Donning instructions:
- Detach nose-mouth covering part of mask and detach the bib.
- Assure that chin pocket adjuster is firmly connected.
- Place chin Into mask chin pocket.
- Place mask nosepiece over bridge of nose and hold entire mask in place with one hand.
- Grasp tab on the back strap of mask, pull strap, around back of head and firmly attach tab to pile fastener on right side of mask.
- Center top strap of mask on head.
- If mask is too loose, separate chin pocket adjuster, pull ends closer together and reconnect firmly.
- If mask is too tight, separate chin pocket adjuster, spread ends further apart and reconnect firmly.
NOTE: Position of eye holes and nosepiece affected by chin pocket adjuster. Do not loosen chin pocket adjuster once it is properly fitted and adjusted.- Press down on nose-bridge stiffener bar in order to mold mask to face.
- Replace nose-mouth covering and attach firmly to pile fastener around the opening.
- If glasses are to be worn, place one leg of the glasses inside center elastic strap11.connecting eye opening, feed glasses through until centered on bridge of nose and place each leg into the elastic glasses holder on each side of mask.
- If required, replace bib.
- To remove mask, simply pull back strap tab.
Use of bib: Bib is provided when additional protection to throat and neck is required. Bib should be attached to lower part of face mask by means of hook and pile fasteners.
Laundry instruction: Wash all parts by hand in hot soapy water. Rinse in clearwater and hang up to drip-dry in room temperature. DO NOT WRING OR TUMBLE DRY as such mechanical action will distort the nose-bridge stiffener.
Stock Number Reference:
Mask, Extreme Cold Weather
NSN: 8415-01-006-3468
Assign Date: 1975-07-16
 |
 |
